13562463338
Glass steel water tankforming hydraulic pressThe pressure is provided by the hydraulic transmission system, and the raw materials such as SMC sheet and food-grade resin are molded into glass fiber reinforced plastic water tank plates under high temperature and high pressure with the mold. The four-column structure of all steel plates is usually adopted. After tempering or vibration aging treatment, the sliding block is guided by four-column guide rails, with good adjustment accuracy and strong rigidity, which can ensure accurate mold clamping. The new oil cylinder sealing element has strong reliability and long service life, the slider runs fast and can improve work efficiency. The cartridge valve integrated system is reliable, large flow, small internal leakage, long service life, and the system is highly integrated, which reduces the connection pipeline and leakage points.
Slider working pressure, no-load fast down and slow working stroke range can be adjusted according to process needs. It has a controllable pre-pressing process, which can improve the flow speed of the material in the mold and shorten the pressure time; it has an automatic exhaust function in the pressing process, and the slider has a micro-opening function when returning, which can prevent the product from tearing and strain.
The glass fiber reinforced plastic water tank forming hydraulic press can realize three working modes: adjustment, manual and semi-automatic. Through the operation panel, it can realize the forming process such as fixed range and fixed pressure, and has the functions of pressure holding delay. It can also be configured with in-mold core-pulling control system and preset in-mold ejection control system to realize a series of actions. PLC servo numerical control can also be used to make the equipment run reliably, operate objectively and maintain conveniently.
Widely used in SMC, BMC resin plastic and other composite materials such as heating molding vulcanization molding, can be used in the production of glass fiber reinforced plastic septic tank water tank, meter box, garbage can, cable bracket, cable trunking, auto parts and other products.
The commonly used glass fiber reinforced plastic water tank forming hydraulic press has a tonnage of 200 tons, 315 tons, 400 tons, 630 tons, 800 tons, 1000 tons, 1200 tons, 2000 tons, etc., which determines the processing capacity and scope of application of the machine. Machines of different tonnages are suitable for manufacturing glass fiber reinforced plastic water tanks of different sizes and thicknesses.
The glass fiber reinforced plastic water tank forming hydraulic press generally adopts a three-beam four-column structure or a frame structure. The specific structure can be determined according to the customer's process requirements and the layout of the production line. The hydraulic press has the advantages of strong bearing capacity, good stability, and spacious operating space.
The hydraulic system is composed of motors, hydraulic pumps, etc., providing hydraulic power sources, including cartridge valve integrated systems, PLC servo control systems, etc. It is mainly composed of oil cylinders, sliders, etc., which convert hydraulic energy into mechanical energy to realize the pressing and forming of workpieces; The worktable is used to place molds and workpieces with high precision and wear resistance. The slider is the executive part of the hydraulic system and moves up and down on the worktable through the drive of the cylinder, realize the pressing of the workpiece. The working pressure of the slider, the stroke range of the no-load fast downward movement and the slow forward movement can be adjusted according to the process requirements.
The glass fiber reinforced plastic water tank forming hydraulic press can also be equipped with heating system, cooling system, etc.
The heating process of the glass fiber reinforced plastic water tank forming hydraulic press is generally equipped with a heating plate and a temperature control system. The heating plate is generally installed on the upper and lower mold seats of the mold, and provides heat for the mold by electric heating or oil heating. The heating plate is designed with heating elements, such as resistance wires, etc., which can uniformly transfer heat to the mold.
The temperature control system includes a temperature sensor, a temperature controller, etc. The temperature sensor is used to monitor the temperature of the mold in real time, and feedback the temperature signal to the temperature controller; the temperature controller adjusts the heating power of the heating plate according to the set temperature value and the feedback temperature signal to realize the temperature of the mold Precise control.
Appropriate heating temperature can promote the curing reaction of the resin, so that the molding compound in the molding process to form a compact structure and excellent performance, high strength, corrosion resistance and so on.
High-performance FRP water tank forming hydraulic press-shaping quality, leading the future
The hydraulic presses designed and produced by Shandong Zhongyou Heavy Industry have undergone strict control and inspection one by one from the parts to the finished products. Strong strength, advanced technology and equipment, perfect detection means, pragmatic work style, and excellent whole process management, build the excellent quality of the company's products
We focus on the development and production of high-end hydraulic forming technology. The glass fiber reinforced plastic water tank forming hydraulic press integrates high efficiency, precision and durability. It is an ideal choice to improve production efficiency and ensure product quality.