1. the appearance of the inspection can avoid the occurrence of many failures, so before starting to use the first check the appearance, check the appearance of the need to pay attention to the following points.
1. Whether the protective device of each hydraulic component is available and intact, because the protective device can prevent chips, coolant, abrasive particles, dust and other impurities from falling into the tank.
2. Whether the oil level in the oil tank meets the specified requirements.
3. Check whether there are any people or sundries that may hinder the operation of the components, such as waste materials, tools, etc., within the travel range of each mobile operation component. If there are any, they must be removed in time and the surroundings must be cleaned up.
4, must not handle and irrelevant items, tools, etc. on the table by mistake, to avoid accidents.
2. check whether the various lubrication parts of the hydraulic press need lubrication. When lubrication is required, be sure to add lubricating oil according to the requirements of the lubrication part of the four-column hydraulic press manufacturer's instructions and use the specified grease,
3. lubricate the sliding parts of the equipment, inject oil into the oil pump with oil, and turn the oil pump by hand, and rotate according to the specified direction to fill the oil pump with oil to avoid burns or seizing due to lack of lubricating oil when the oil pump starts.
4. start the motor oil pump and listen to the oil pump for abnormal sound.
5. makeCattle and sheep brick licking hydraulic pressThe various parts that can be operated flexibly, such as the workbench running several times, check for abnormalities before use.
6. whether the working performance and pressure head of the cattle and sheep licking brick hydraulic press are suitable for the corrected work.