What are the process actions of Tengzhou head cold forming hydraulic press?

 

　　Head cold forming hydraulic pressIt is a stretching equipment specializing in the production of various heads. Its working pressure, pressing speed, and stroke can be adjusted within the specified parameters according to process needs. Tengzhou head cold forming hydraulic press is a relatively high cost of domestic molding equipment, the cold forming process action is as follows:

Cold-pressing forming part of head

Initial position of head hydraulic press; The stretching slider and the holder slider descend quickly together & rarr; The holder slider descends quickly separately & rarr; The holder slider pressurizes & rarr; The stretching slider stretches the workpiece downward; The pressure holding delay and pressure release Stretching slider The holder slider returns and the lifting rotating device jacking the workpiece (after the workpiece is removed) and the lifting rotating device returns. The ejection starting time of the jack-up rotary device can be excited by the position set in the return stroke of the slider to increase the working frequency.

Below to understand the head of the cold forming hydraulic press applicable environment:

1. Temperature of equipment working area:-10~60 ℃(±)

2. Power supply: three-phase four-wire 380V, 50HZ, voltage fluctuation range 380V ± 10%

3. Cooling mode: water cooling device

4. Medium used in hydraulic system: No. 46 anti-wear hydraulic oil.

The total nominal force range of Tengzhou head cold forming hydraulic press is 6300kN ~ 60000kN, and the opening height of the main machine, slider stroke, worktable top, stretching edge holding force, etc. can be determined according to user requirements and the needs of the pressing process. ShandongZhongyou Heavy IndustryMachine Tool Co., Ltd. specializes in designing and producing all kinds of head pressing equipment, with short construction period and fast delivery. Some tonnage head cold pressing forming machines are in stock. Users are welcome to visit the company and test the machine.