Automobile wheel hub stamping industry YYDS--800 tonsfour-column hydraulic press
Wheel hub, also known as rim, is the barrel-shaped part of the tire inner profile used to support the tire and the center is assembled on the shaft. ShandongZhongyou Heavy IndustryMachine Tool Co., Ltd. Design and production800-ton four-column hydraulic pressSimplify the wheel stamping production steps, can be very good to complete the automobile wheel stamping process, can be called automobile wheel stamping industry YYDS equipment.
automobile wheel hub stamping parts
800-ton four-column hydraulic press
It is reported that the 800-ton four-column hydraulic press adopts a three-beam and four-column structure. It is a universal general-purpose equipment. One machine has multiple functions. Other equipment can be produced by changing the mold. The specific components of this machine are introduced as follows:
1. The fuselage is composed of four columns. The upper and lower beams are all made of integral cast steel. The upper and lower beams are connected by four columns with inner and outer nuts to bear the tension during work.
The main hydraulic cylinder prevents steel castings. Ensure the service life of the equipment.
Supporting mold frame and mold, pressure head, etc. designed with superior processing capacity of the protection. The punch of the die and the briquetting machine are equipped with wear-resistant steel that can be quickly replaced. The front end of the punch is equipped with a wear-resistant punch pressing ring that is easy to disassemble and install, so that its service life can be prolonged. The relevant parts are specially hardened or forged where necessary.
automobile wheel hub stampingforming hydraulic press
2. Hydraulic station: It is composed of motor, hydraulic pump, pump protection device, control valve block and piping system for connecting briquetting machine. Reasonable design and stable quality. Avoid the equipment due to overheating of the oil temperature and can not work continuously.
3. Console: composed of electrical system and PLC control system.
Cabinet type press action and temperature combination cabinet. Instruments and switches on the cabinet panel; power switch, indicator light, voltmeter, ammeter; press action button and indicator light; pressure indicator; heating switch and indicator light; digital display temperature regulator (accuracy 1 ℃); heat preservation timer, overtemperature alarm; operating temperature 180 ℃; heating rate 1.7 ℃ ~ 2.5 ℃/min; temperature unevenness ± 3 ℃, heating power of each phase power supply is balanced; the temperature regulator controls the corresponding temperature measuring area in real time. When the set value is reached, the timer counts. After the set time is reached, the temperature control system can automatically heat up or cut off the power according to the process set value.
The 800-ton four-column hydraulic press is suitable for the pressing process of plastic materials, such as stamping, bending, flanging thin stretching, etc. It can also be engaged in correction, pressing, pressing and forming of plastic products and powder products. Shandong Zhongyou Heavy Industry Machine Tool Co., Ltd. can customize one-on-one special solutions according to customers' production needs. For details, please consult Shandong Zhongyou Ding Manager 13562463338 (with micro signal).