Mine bolt tray is a kind of mine support material, there are a variety of specifications, used to match the bolt support. The processing of mine anchor tray is generally made by hydraulic press with mold at one time. Shandong Zhongyou designed and produced mine anchor tray stamping.forming hydraulic pressIt is specially used for processing and forming of mine anchor tray.
According to the material, specification and thickness of the mine anchor tray, Shandong Zhongyou can customize and produce 315 tons, 400 tons, 500 tons, 630 tons, 800 tons, 1000 tons and other tonnages of the mine anchor tray stamping hydraulic press for customers. With the automatic feeding device, 4-6 finished products can be produced in one minute, and with the manipulator and feeding line, lightweight automatic production can be realized.
of which 315 tons and400 ton hydraulic pressCan press 150 x150x8mm, 150x 150x 10mm and other specifications of the mine anchor tray,500 ton hydraulic pressCan press 200 x200x14mm, 240x 240x 14mm anchor tray, 630 tons,800 ton hydraulic pressBolt trays above 300x 300x 16mm can be pressed.
The stamping and forming process of the mine anchor tray does not require manual operation. The automatic feeder directly grabs the cut long strip and sends it to the anchor tray mold. The hydraulic press for stamping and forming the mine anchor tray completes shearing, punching and pressing in one pressing process, and the pushing rod pushes out the pressed tray.four-column hydraulic pressThe operation of pressing anchor tray is simple, and the hydraulic press of anchor tray-automatic punching and shearing pressure forming equipment has high efficiency, high safety factor and labor cost saving.