As an important part of the bolt support system, the anchor tray is mostly used in the mine, with round, square, diamond and other shapes. For the processing of anchor tray,Friends of ShandongDesign and production of a bolt tray stamping formingHydraulic press, The three-beam four-column structure can realize the one-time stamping and forming of the straw tray. There are three configurations of low, medium and high, and the prices are different for different configurations. It can be matched with anchor tray mold and automatic feeder to form an automatic production line of anchor tray.
According to the anchor tray material, specifications, thickness and other factors, Shandong friends can customize 200 tons, 315 tons, 400 tons, 500 tons, 630 tons, 800 tons, 1000 tons and other types of anchor tray stampingforming hydraulic pressThe specifications of anchor trays that can be processed by different tonnage equipment are different.
The 500-ton anchor tray stamping and forming hydraulic press can press 300 x300x14mm, 300x 300x 16mm and other specifications of anchor trays, with an average of one piece in 10 seconds, 6 pieces in one piece, and 6 pieces in more than 20 thick.30 ton hydraulic press。
When the sliding block of the hydraulic press for stamping and forming anchor tray designed and produced by Shandong Zhongyou goes down, it can complete the shearing, punching, pressing, etc. of the plate at one time, and one machine is used for many purposes. The pressed anchor cable disc does not need to be manually reclaimed, and is directly slid to the ground, with simple operation and high safety factor.
Our company can also provide customers with shearing machine, anchor tray stamping forming hydraulic press, feeder, mold and other equipment according to the needs of customers, forming an automatic production line of anchor tray, which can realize lightweight automatic production with manipulator and feeding line.