Particle steel is the steel slag waste after steelmaking, small volume, large water content, the cost of its recovery and processing is too high,Friends of ShandongA particle steel briquetting machine is designed, which adopts three-beam four-column structure or frame structure, and can heat-press steel slag particle steel, cast iron scrap, steel scrap, copper scrap, aluminum scrap, sponge iron, iron ore powder, furnace slag powder and other non-ferrous metal scrap into cylindrical cake, which is convenient for transportation and recovery.
According to the material, specification, density and technology of particle steel, Shandong Zhongyou can design and produce particle steel briquetting machines of 630 tons, 800 tons, 1000 tons, 1200 tons, 1500 tons, 1600 tons, 2000 tons, 2500 tons, 3000 tons, 4000 tons and other tonnages.Hydraulic pressOn the basis of the improved production process and pressing action, can be a mold two out greatly improve production efficiency and production.
Production Process of Particle Steel Briquetting Machine
The temperature is controlled by a low-temperature convection dryer and a thermostat to dry the particle steel. The dried 700 ℃ particle steel is deoxidized, demixed and sent to a particle steel briquetting machine through a transmission system in a pre-dissolved state. After pressing and forming, the pressed particle steel blocks are lifted by a loader to a finished product warehouse. The specific gravity of the processed particle steel block can reach more than 6.2, and the weight of a single block can reach more than 80kg. The market benefit is good, the return on investment is high, and it is not easy to be blown out during the furnace.
According to the output demand of particle steel briquettes, it can be divided into 60000 tons, 80000 tons, 100000 tons, 150000 tons, 200000 tons, 300000 tons and so on. Take the project with an annual output of 60000 tons of hot briquettes as an example, the daily output is 200 tons in 300 days a year, and one piece is about 80kg, and about 2 pieces per minute is enough.
In the whole process of particle steel briquetting, feeding machine, low-temperature convection dryer, temperature regulating equipment, waste heat recovery heat exchanger, dust collector, intermediate transfer device, particle steel briquetting machine, smoke extractor, circulating fan, finished product conveying equipment, pipeline, automatic control system and other equipment are required to form a production line to realize automatic processing of particle steel briquetting. For more product videos, please pay attention to the official trembles of Shandong Zhongyou.