Page 125_Product Knowledge_News Center_General Article

News Center

column information in the field of hydraulic machinery, relying on friends [20 years] industry deep plowing experience, focus on the output of hydraulic technology innovation, market trends, application cases and other high value content. With the aim of "professional, timely and deep", we provide one-stop information service for engineers, purchasing decision makers and industry researchers, helping users to accurately grasp the pulse of hydraulic technology development.

Product knowledge

2022-04-24

What are the effects of pressure disorders on a 630-ton hydraulic press? How to deal with it?

Pressure is a necessary condition for the normal operation of the 630-ton hydraulic press. If the pressure is insufficient, it will cause defective parts. The abnormal working pressure of the hydraulic system is manifested as: the pressure regulating valve fails when the hydraulic system is adjusted, the system pressure cannot be established, or there is no pressure at all...

Product knowledge

2022-04-24

Why does cavitation occur in the hydraulic cylinder of a 630-ton hydraulic press?

The four-column hydraulic press is an oil pump that delivers hydraulic oil to an integrated cartridge valve block. The hydraulic oil is distributed to the upper or lower chamber of the cylinder through each check valve and safety valve. A hydraulic press is a device that uses liquid to transmit pressure. when the liquid in closed capacity...

Product knowledge

2022-04-24

630 tons hydraulic press hydraulic system leak how to do?

Leakage has always been one of the important reasons that affect the normal operation of the 630 ton hydraulic press. There are many leakage situations, which can be divided into system leakage, component leakage, hydraulic pump leakage, etc. Among them, the hydraulic system leakage is relatively large, so how can the hydraulic system leakage of the hydraulic press be...

Product knowledge

2022-04-24

630 tons of hydraulic press circuit prone to what problems?

1. Proximity switch: The proximity switch not only controls the stroke of the 630-ton hydraulic press, but also plays a protective role. The proximity switch has almost no problem even if we use it normally. 2. Relay: There are many electrical equipment boxes in the 630-ton hydraulic press...

Product knowledge

2022-04-24

What if there is no pressure problem at the top of the 630 ton hydraulic press?

Generally speaking, the lack of pressure at the top of the 630-ton hydraulic press is related to several aspects: 1. If the top cylinder of the 630-ton hydraulic press falls off as soon as it comes out, it is related to the pressure regulating valve, remove the pressure regulating valve cover, pull out the plug-in piston inside, and see if there is any foreign matter inside. It's...

Product knowledge

2022-04-24

How does the 630 ton hydraulic press enter the air? What to do after entering?

The reason why the hydraulic press is easy to mix with air 1. The new hydraulic cylinder, the repaired hydraulic cylinder or the cylinder with too long downtime of the equipment, there is air in the cylinder or the exhaust in the hydraulic cylinder pipeline is not discharged; 2. Negative pressure is formed inside the cylinder. Inhale air from the outside; 3, from the cylinder...

Product knowledge

2022-04-24

How is the 630 ton hydraulic press connected to the hydraulic oil pipe?

The hydraulic system is divided into integrated type (hydraulic station type) and decentralized type according to the connection form of hydraulic control components. No matter which form, to be connected into a system, fluid connectors are required. Therefore, whether the choice of pipeline is reasonable and whether the installation is correct. cleaning is...

Product knowledge

2022-04-24

630 tons hydraulic press manufacturers recommend professional manufacturers

tengzhou as the capital of small and medium-sized machine tools, production of 630 tons of hydraulic machine manufacturers naturally not a few, then we are faced with the problem is: tengzhou 630 tons of hydraulic machine manufacturers which technology is good:...

Product knowledge

2022-04-24

How to maintain the cooler and oil filter of a 630 ton hydraulic press?

630 ton hydraulic press is a kind of mechanical equipment that uses the static pressure of oil pump to transport hydraulic oil to process metal, plastic, rubber, wood, powder and other products. equipment use more and more widely, small make up below introduce equipment cooler and oil filter maintenance use...