The correct maintenance of the frame type hydraulic press can prolong its service life, so do you know how to maintain the frame type hydraulic press:
Maintenance before use
(1) Check whether the oil pool, oil level and oil mark meet the specified standards. If not, add oil in time.
(2) Check whether the button is flexible and has no jam.
(3) Check whether the motor grounding wire is loose, falling off or damaged. If there is looseness should be fastened, fall off or damage should be notified to the maintenance personnel to deal.
(4) Check whether the protective device is complete and reliable.
(5) Check whether each handle is flexible.
(6) Tighten the loose nuts.
Maintenance in use
(1) Start the hydraulic pump and check whether the hydraulic pump functions well and whether the sealing parts and pipelines are blocked and leaked.
(2) Check whether the function of the limit switch is good and whether the positioning of the contact block is normal.
(3) Pay attention to whether the temperature rise and sound of each running part are normal at any time.
Maintenance after use
(1) Check and clean all moving parts.
(2) Each control handle (switch) is set to neutral position (zero position).
(3) Check, clean and arrange the working face and working area.