single-arm hydraulic pressIt is mainly suitable for stretching, forming and pressing of metal products. It can also process non-metallic materials, pressing of powder metallurgy products, correction of shaft parts, pressing of sleeve parts and shaping and trimming of metal products.
single-arm hydraulic pressThe main contents of the operation and use precautions are:
The 1. shall not operate the machinery and equipment without understanding the structure, working performance and operating specifications of the equipment.
2. machinery and equipment in the work process, should not be repaired and adjust the mold, the maintenance of equipment operation is very dangerous.3. when the machine found serious oil leakage or other abnormalities (unreliable action, noise, vibration, etc.), should immediately stop, analyze the reasons, try to eliminate, never allow the disease into production.
4. fast single column hydraulic presses shall not be overloaded or used over a large eccentricity.
5., it is strictly prohibited to operate over the large stroke of the slider, and the closing height of the mold shall not be less than 600mm.
The grounding of electrical equipment of the 6. hydraulic press must be firm and reliable, and the grounding is not allowed to be connected to the electrical box by mistake.
7. the end of the day, the slider should be placed in a lower position.
The above is the single arm hydraulic press operation matters, we hope to help.
single-arm hydraulic pressThe main contents of the operation and use precautions are:
The 1. shall not operate the machinery and equipment without understanding the structure, working performance and operating specifications of the equipment.
2. machinery and equipment in the work process, should not be repaired and adjust the mold, the maintenance of equipment operation is very dangerous.3. when the machine found serious oil leakage or other abnormalities (unreliable action, noise, vibration, etc.), should immediately stop, analyze the reasons, try to eliminate, never allow the disease into production.
4. fast single column hydraulic presses shall not be overloaded or used over a large eccentricity.
5., it is strictly prohibited to operate over the large stroke of the slider, and the closing height of the mold shall not be less than 600mm.
The grounding of electrical equipment of the 6. hydraulic press must be firm and reliable, and the grounding is not allowed to be connected to the electrical box by mistake.
7. the end of the day, the slider should be placed in a lower position.
The above is the single arm hydraulic press operation matters, we hope to help.