CNC vertical lathes compared to ordinary lathes, the operation is more convenient and quick, but in the operation of what steps to understand.
First of all, look at the drawings carefully before seeing the drawings and processing products. If the drawings are unclear or damaged, they cannot be changed without authorization or make their own decisions, and they must be reported for replacement.
Secondly, to check the blank for a new product, first of all, the blank must be inspected. It cannot be found that there is a problem with the blank when the product is processed. Mainly check the appearance and margin of the blank, and pay attention to the products with electric welding.
In terms of programming, all programs are edited and managed by the team leader. The operator cannot edit or modify them. If modification is required, the team leader must agree, but the operator is required to check the program before processing the product.At the same time, prepare the required fixtures and tools, and install the fixtures, workpieces and tools. Reasonable selection of fixtures and tools, can not modify the fixture, such as the need to modify the report to the team leader. Then, the clamping workpiece must pay attention to: whether the pressure of the clamping jaw is within the clamping range; Whether the clamping jaw is concentric; Whether the iron filings on the surface of the clamping jaw are clean, whether there are chips stuck at the clamping part, and whether the workpiece is corrected. For the wear of the blade to be replaced in time. There is also a knife match. * pieces are processed. After that, the first inspection is carried out against the drawings.
