CNC vertical latheIt is mainly used for processing large and heavy workpieces with large diameter and short length and workpieces that are not easy to clamp on horizontal lathes. The following CNC vertical lathe manufacturer will show you the operation precautions of the vertical lathe?
1. It is necessary for the operator to undergo strict training to understand the performance structure of the machine tool and the transmission system to prevent over-performance and overload use. Prevent irrelevant personnel from entering the operation area of the machine tool to prevent abnormal conditions.
2, when the machine tool is running, the boy Kun is not bad, the beauty of the equipment is monitored, the city of Hui is responsible for the operation of the machine tool. Even in the machine "automatic operation" state is not allowed.
3. When each axis moves close to the position, it shall decelerate appropriately to avoid overtravel.
4. The rough surface of the workpiece shall not be directly settled on the operation platform. Pad iron or spiral top support shall be applied. Stop proofreading, welding and other operations on the operation platform.
5. When looking for the right workpiece, you can only jog the operation platform to turn at low speed to find the right at high speed.
6. When the operation platform rotates, it is forbidden to lift the beam and move the tool holder quickly.
7, machine tool operation in the prohibition of contact with the operation of the workpiece and tool in the operation of the prohibition of measurement scale.
8. Before hoisting the workpiece, the static pressure of the workbench should be turned off.
9. When processing the workpiece, the connection between the extension length of the ram and the cutting force should be considered according to the requirements of the machine tool manual; the connection between the speed of the work table and the weight of the workpiece should be considered.
10. Spindle speed change is prohibited before the workbench stops. The tool shall not be parked until it is withdrawn. When the machine is at a low temperature, do not make the platform immediately start at high speed, to avoid gear, bearing damage to the platform should be in low speed operation for a period of time and then rise to high speed.