1.315 ton hydraulic pressThe wear of hydraulic pump parts, like any equipment parts, is the inevitable result of mechanical operation. Under normal conditions of use, the gradual increase in wear due to long-term effects of friction and chemical reactions is related to natural wear. This kind of wear of hydraulic press cannot be eliminated and avoided, but through careful maintenance and correct use of the pump, the wear process can be slowly slowed down, and the main reasons and phenomena of the wear cycle of hydraulic press are: friction wear, abrasive wear, pit wear and corrosive wear.
2. Violations315 tonsThe operation procedures and maintenance regulations of the hydraulic pump of the hydraulic press cause serious overload, over-speed, even the parts in the pump have become loose and will fall off, and are still forced to start, or when foreign matters such as tools fall into the hydraulic press pump and other causes such as damage to the parts of the hydraulic pump.