1, ifCattle and sheep brick licking hydraulic pressIf the oil temperature is too high, check whether the setting value of the pressure control valve is too high. If it is too high, reduce the working pressure of the machine
2, to beCattle and sheep licking brickAfter the hydraulic press equipment is naturally cooled, open the oil drain plug and take oil samples.
3. Check the viscosity index of the oil. If the viscosity is too low, it will affect the pressure index of the small hydraulic press.
4. If the oil is obviously turbid and the hydraulic oil is mixed with water, it is recommended to replace it as soon as possible.
5. When replacing the hydraulic oil, be sure to release all the oil in the hydraulic system of the whole small hydraulic machine, including the hydraulic tank, and replace all the new oil. At the same time, ensure that the hydraulic oil shall not be less than 100kg each time.
6, becauseCattle and sheep licking brickHydraulic machine hydraulic pump and its connection leakage and heat, to tighten the connection, strengthen the seal;
7. When the capacity of the hydraulic oil tank is too small and the heat dissipation condition is poor, the capacity of the oil tank should be increased and the cooling equipment should be installed;