Correct use and maintenance, no pollution of hydraulic system
Take effective measures to reduce the influence of temperature on hydraulic system leakage
Correctly install the pipeline, and no illegal assembly is allowed.
Correct configuration of hydraulic press hose lines
The installation of the hose needs to tighten the thread. Be careful not to twist the hose. Draw a colored line on the hose for observation. The hose should be installed directly with a length allowance of about 30%.
Correct installation of hard pipe line
The installation of rigid pipe should be horizontal and vertical, minimize turning and avoid crossing. The radius of the turn should be 3 to 5 times greater than the outer diameter of the tubing
Carefully check the pipeline quality, and it is forbidden to use unqualified pipelines.
During maintenance, the date and batch number of the manufacturer, as well as the specified service life and defects should be certified and checked for the newly replaced pipeline. Pipelines that do not meet the requirements must not be used.
Correct use and assembly of the seal to ensure that the seal is in good condition
In order to ensure the quality of the seal, the selected seal should meet the following requirements: it should have good sealing performance, the friction resistance at the dynamic seal is reduced, wear resistance and longer life