1. whether it has an independent power organization and electrical system?
200 tonsfour-column hydraulic pressIt belongs to the category of medium-sized hydraulic press. According to the introduction of professional and technical personnel in this field, it has an independent power organization and electrical system, and adopts button centralized control, which can be adjusted appropriately. In the mode of operation, there are three modes of operation: automatic, semi-automatic and manual.
What tools are used to tighten the 2. column nuts? What are the instructions on its composition?
These two problems, the column nut of the 200-ton four-column hydraulic press, are tightened by using a crescent wrench.
The hydraulic transmission system includes power organization, control organization, execution organization, auxiliary organization and operation medium composition. In the power organization, the oil pump is usually selected as the power organization, usually a product oil pump. In order to meet the requirements of the speed of the tissue movement, one or more oil pumps can be selected. In addition, in the hydraulic control, the cartridge valve integrated system can be selected, because it has the advantages of reliable action, small hydraulic impact and long service life, but hydraulic control can also be used.
Is there any difference between the upper jacking cylinder and the lower jacking cylinder of the 3?
The upper top cylinder and the lower top cylinder of the 200-ton four-column hydraulic press, if you compare the two, the conclusion is that there is a big difference between the upper top cylinder and the lower top cylinder, and the difference between the two, Specifically, the upper top cylinder refers to the top from bottom to top, and the lower top cylinder refers to pressing down from top to bottom, which are two different concepts.
How is 4. weight calculated?
Calculate the weight of the 200-ton four-column hydraulic press, which can calculate the general weight, if it isThree-beam four-column hydraulic pressIt should take into account the weight of the fuselage, as well as the hydraulic machine tonnage, stroke, opening or closing height, table area, slider speed and master cylinder layout and other parameters. Also, it may be required to estimate the weight in the scheme design process.