The cause of hydraulic system failure may be difficult to identify, but some troubleshooting steps can help narrow down the options. This articleZhongyou Heavy IndustryHow to troubleshoot the hydraulic system? How to prevent hydraulic system failure.
How to troubleshoot the 1. hydraulic system?
The cause of the hydraulic system failure may be difficult to identify, but some troubleshooting steps can help narrow down the options, so how to troubleshoot the hydraulic system? Here are some basic principles.
1) Check the motor: make sure the motor is wired correctly and can be turned on and off.
2) Check the pump: Disassemble the pump assembly and evaluate all parts to ensure that they are working properly and installed correctly. The most common problem areas include the pump shaft, coupling and filter.
3) Check the hydraulic oil: Check the liquid level, color and viscosity of the hydraulic oil to ensure that it meets the specifications and is not contaminated. If in doubt, please drain and replace the fluid.
4) Check the valves and pipelines: Observe all pipelines for potential leaks, and tighten each connection point. In addition, check the safety valve for signs of damage.
5) Running the system: After completing all these basic checks, please turn on the system and monitor its pressure and temperature fluctuations and abnormal sounds. If everything is normal, please check the pressure sensor for potential failures.
2. how to prevent hydraulic system failure?
Hydraulic system problems are inevitable at some point, but simple steps can help you avoid these problems and extend the life of the hydraulic system. In addition to effective troubleshooting, you can also prevent hydraulic system by performing the following steps. Failure.
1) Follow the specifications: We can trace the most common hydraulic system problems to the fundamental system problems, such as incompatibility or improper installation of parts. Therefore, it is important to always carefully check the specifications to ensure that the parts you buy can work together seamlessly.
2) Consult professionals: Buy new equipment to consult industry peers and professionals to find out what they have to suggest. Although manufacturers can tell you how the product should work, industry experts can provide specific examples of how the device works in their industry.
3) Perform maintenance: It is important to focus operations on the service life of the equipment. Review daily, monthly and annual maintenance procedures to ensure that you cover all aspects of the system in accordance with best maintenance practices.
On top of these steps, research hydraulic system products specifically designed to help prevent failures.
[Zhongyou Heavy Industry Press Typefour-column hydraulic presscharacteristics]]
The XD-32 series press four-column hydraulic press adopts the integrated design of cylinder and beam, which has strong load resistance, compact structure, space saving, and is equipped with a sub-mother cylinder structure, which can realize fast no-load, and is suitable for relatively small auto parts, Processing of hardware tools, gears and other parts.
Zhongyou Heavy Industry's press-down four-column hydraulic press equipment is mainly suitable for shaping, stamping, shallow stretching, trimming, blanking, bending, flanging, press fitting, correction, press forming, etc. of metal or non-metal materials or plastic materials.