The rubber slag retaining plate of railway bridge tunnel is also called rubber bridge walking plate, which is equipped with steel skeleton, which has strong bearing capacity, is not easy to deform, and is stable and anti-seismic and anti-skid. It is the large-scale railway lines that are being fully built in our country. There is a harmony number set up for us on the track. Under the track, there is a rubber walking board supplied for you by Yucai Rubber Factory in Sanmen County, so that you can travel safely and go home happily.
The bridge light rubber walking board is made of natural rubber as the main raw material, with a threaded steel frame inside, which is pressed by high temperature and high pressure, and the surface is set with concave and convex patterns. It is an ideal product to replace the reinforced concrete walking board. Hot molding rubber bridge walking board needs to choose the appropriate structure tonnage of hydraulic press, called 315 tons of railway bridge light rubber walking board molding.forming hydraulic pressThe equipment adopts a three-beam four-column double-cylinder structure design and a four-column structure. The movable plate is parallel to the working surface with high precision, and the four guide sleeves make the downward pressure vertical precision high. The oil cylinder adopts adjustable type. The upper pressure plate moving mechanism is composed of oil cylinder, linear bearing, 4-column guide rod, mold, mold and other components.
Features of 315 ton railway bridge lightweight rubber walking board molding hydraulic press:
1) The 315-ton railway bridge lightweight rubber walking board molding hydraulic press adopts four-column three-plate, upper and lower board heating control, with a large output of 315 tons, a stroke of 800MM, an adjustable stroke of 1000MM, a working height of 700MM, and a working area of 1000*1000MM.
2) The hydraulic system adopts time control, and the output can be adjusted according to the product needs.
3) The 315-ton railway bridge light rubber walking board molding hydraulic press is a two-hand start button, equipped with an emergency button and an upper and lower die inching operation button, which is convenient for mold installation and correction.
4) The 315-ton railway bridge lightweight rubber walking board compression molding hydraulic press is divided into two operations: manual/automatic. Start the machine: press the up and down buttons in the manual state, and the machine can move up and down to test the product pressure to meet the product requirements. In the automatic state, press the start button with both hands to press down the machine quickly, press down until the product reaches the set time, the machine quickly picks up and then stops, and the action is completed in one week.
Hot-molded railway bridge lightweight rubber walking board315 ton hydraulic pressIn addition, the company can tailor suitable bridge light rubber walking boards, 400 tons, 500 tons, 630 tons, 800 tons and other four-column hydraulic presses or frame hydraulic presses according to the characteristics of the products. The equipment mostly adopts a four-column three-plate structure, controlled by a four-column precision guide sleeve, and the parallel precision and vertical precision of the movable plate and the worktable are extremely high. The upper and lower working faces are equipped with heat-treated heating plates, with a universal T-shaped Cao fixed mold, and PID control of intelligent thermostat, with high precision and small temperature error. Process adjustment is simple: pressure, stroke, speed, holding time, closed height can be adjusted according to the production process, easy to operate. To purchase and understand the 315-ton railway bridge light rubber walking board molding hydraulic press equipment, please consult the company.Manager Zhang: 13562463338 (WeChat can be added)