1.800 tons of saggersforming hydraulic pressThe hydraulic oil tank is equipped with oil temperature automatic heating, cooling system and oil purifier device, and adopts multiple continuous filtration to ensure the use conditions of hydraulic oil;
2. The upper beam of the 800-ton sagger forming hydraulic press: the upper beam is also called the cylinder seat, the middle is hollow, used to fix the cylinder, and its quality requirements are very high;
3. Double-sided compression molding of 800-ton sagger molding hydraulic press: double-sided compression molding principle is adopted, but there is no ejection cylinder at the lower part, which is realized by the way that the oil cylinder and sliding block descend and the mold does not move, which is not only convenient for maintenance but also low in cost.
4. The 800-ton sagger forming hydraulic press adopts a two-way pressing sagger hydraulic press adopts a four-beam and four-column structure, and the mold frame is fixed on the middle fixed beam. The upper and lower pressure heads are respectively fixed on the upper and lower movable beams. Driven by the main cylinder fixed in the upper and lower fixed beams, the upper and lower movable beams pressurize the brick billet in both directions. Ensure high density of brick. Since the upper and lower punches are fixed on the upper and lower movable beams, and the upper and lower movable beams are precision-machined, the four-column guide rods slide to run, which fundamentally solves the possibility of the punch hitting the upper, not only the running speed High, and the main cylinder seal wear is small. Not easy to damage and leak. Low failure rate;
5. The hydraulic system of the 800-ton sagger forming hydraulic press is double-pump and double-circuit, and a professional combined valve block is adopted to realize the working cycle of packing, exhaust, pressurization and demoulding.
6. Limit device of 800-ton sagger forming hydraulic press: it is located on the left side of 200-ton four-column universal hydraulic press body. The travel switch controls the upper and lower limit, adjusts the upper and lower limit switches, and adjusts the upper and lower positions of the slider.
7. Large parts such as beams, worktables and sliders of the 800-ton sagger forming hydraulic press are made of high-quality cast steel. The sagger forming hydraulic press-sagger special bidirectional press (630-ton 800-ton) adopts computer optimization design. The strength, rigidity and anti-deformation structure meet the standard requirements and the safety factor is high;
6.800-ton sagger forming hydraulic press sagger forming hydraulic press adopts a four-beam and four-column structure. The cross beam and the column are fixed by fastening nuts. Adjusting nuts can adjust the precision of the main machine, which has excellent strength, rigidity and precision retention;
7.800-ton sagger forming hydraulic press column: 45# forged steel, after tempering, the surface is plated with hard chromium, the wear resistance is improved, and the hardness is high;
8, 800 tons sagger molding hydraulic press work surface: also known as the mold body, cast steel structure, used to fix the mold;
9. Hydraulic cylinder of 800-ton sagger forming hydraulic press: a piece of equipment, according to the production process and user requirements, includes main cylinder, cloth cylinder, push block cylinder or fast cylinder, etc., with good sealing performance and strong wear resistance. It is a cylinder made of forged steel 45# material, and the forging, quenching and tempering hardness of Grade 3 qualified by ultrasonic flaw detection are qualified;
10.800-ton sagger forming hydraulic press slider: There is a T-shaped groove on the lower plane of the slider, which is very convenient for installing the mold; the nut material is 45 forged steel, which matches the thread on the column to lock the body;