1. Cleaning needs to disassemble the oil cylinder. During the disassembly process, care should be taken not to damage the piston rod and seals, and place them in a clean place;
2, do not use cotton, hemp, silk and chemical fiber fabric to wipe, to prevent the shedding of fiber pollution system;
3. Parts that have been cleaned but not assembled for the time being should be stored in anti-rust oil to prevent dust pollution and rust;
4. Disassembly and assembly and cleaning of the oil pressure parts of the oil cylinder should be carried out in a clean room that meets the standards. If there are conditions, the operation room can be pressurized to make the indoor pressure higher than the outdoor pressure to prevent atmospheric dust pollution;
成型液压机清洗油缸时有哪些注意事项？
5. Check whether the seal and piston rod are damaged, check the possible hidden dangers, and replace or repair them;
6. After cleaning to ensure that the cleanliness of the hydraulic oil reaches the standard, it can be used normally after entering the equipment commissioning and operation stage;
7. After all parts are cleaned and qualified, assemble them in sequence;
8. Do not install it immediately after installationforming hydraulic pressOn, should go through a simple test, there is no problem before it can be assembled to the equipment.