100 tons of three-beam four-column pressure cup lid stretching hydraulic press 100T stretch forming pressure cup lid hydraulic press

Video Show

Introduction of hydraulic press

The three-beam and four-column drawing machine is a hydraulic press specially designed and manufactured for the industries of aluminum, copper products, stainless steel and thin iron products. It is especially suitable for sheet drawing and pressing forming of stainless steel and sheet. Two-stage speed control of movable beam plate: no-load fast and slow drawing by die, improve the success rate of product production and reduce the rejection rate of products. This machine is also suitable for the pressing process of plastic materials in the metal industry. Such as sheet drawing, flanging, punching, forming, straightening and other processes, can also be used for metal cold extrusion process.

Hydraulic machine body

The galvanized sheet is used as the substrate, the worktable and slider are the whole 45# cast steel, the galvanized sheet is used as the substrate, and the high-quality environmentally friendly polyester baking varnish is used as the topcoat.
  

Hydraulic press master cylinder
The cylinder of the machine is 45# steel, which is processed by forging to extend the service life of the machine.

Hydraulic system of hydraulic press
The machine adopts a large flow cartridge valve, and an oil suction filter is arranged at the oil inlet of the pump to prevent impurities from entering the hydraulic system to ensure the normal operation of the oil circuit. The system has oil temperature, oil level display, air filter and other devices. The oil tank is of steel plate welded structure, and the bottom is equipped with screw plugs for oil drain and sewage discharge. Plug-in hydraulic special motor to reduce workshop noise.

Hydraulic machine electrical system
The machine is equipped with an independent electrical control box to centrally control the operation of the entire machine. The equipment is equipped with photoelectric protection device and emergency stop button to ensure the safety of personnel and equipment during operation.

hydraulic press operating system
The machine adopts PLC programming system to realize free switching of automatic and semi-automatic operation modes, which is convenient for equipment maintenance. The operating speed of the equipment and the pressure of the master cylinder can be adjusted at will. Meet the process requirements of fixed range and pressure during production.

pressing process

Suppression case